Search Parts







 
Item # R&R
Part No.
Description


Alloy Solid Tines
These tines aerate without the work of cleaning up the mess of cores and debris left behind with conventional core aerating. R&R Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC45-48 in our own heat treat facility. They are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and no cores, play can be resumed immediately.

R201422 Tine - Needle 5mm (.196) x 3.5
R201423 Tine - Needle 5mm (.196) x 4.75
R201334 Tine - Solid 1/4 x 1/2 Mt 2.5L
R523863 Tine - Solid 1/4 x 1/2 Mt
R201330 Tine - Solid 5/16 x 1/2 Mt
R201349 Tine - Solid 1/4
R201341 Tine - Solid 5/16
R201344 Tine - Solid 3/8
R201345 Tine - Solid 1/2
R201432 Tine - Solid 5/16 x 4.375 x 3/4 Mt.
R201433 Tine - Solid 3/8 x 4.375 x 3/4 Mt.
R201434 Tine - Solid 1/2 x 4.375 x 3/4 Mt.
R201346 Tine - Solid 5/8

Alloy Shatter Tines
With their "+" shape, R&R shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. R&R Shatter Tines are manufactured from special high-carbon alloy investment castings and heat treated to RC45-48 in our own facility to insure you of optimum quality.
R201546 Tine - Shatter 3/8 x 1/2 Mt
R201555 Tine - Shatter 1/2 x 1/2 Mt
R201547 Tine - Shatter 3/8 x 5/8 Mt
R201560 Tine - Shatter 1/2 x 5/8 Mt
R201549 Tine - Shatter 3/8 x 3/4 Mt
R201570 Tine - Shatter 1/2 x 3/4 Mt
R201620 Tine - Shatter 5/8 x 3/4 Mt x 5.5
Standard Hollow Tines
Designed to remove a soil core, R&R Standard Hollow Tines are constructed from case hardened tubular steel and are the most economical tines available. Case hardening hardens the inner and outer surfaces of the tine wall to over RC55 for added wear.
R201335 Tine - Hollow 1/4 x 5/8MT x 4-1/2L
R201336 Tine - Hollow 3/8 x 5/8MT x 4-1/2L
R201337 Tine - Hollow 1/2 x 5/8MT x 4-1/2L
R201338 Tine - Hollow 5/8 x 3/4MT x 4-1/2L

Alloy Hollow Tines
Like Standard Hollow Tines, this line is also tubular and designed to remove a soil core, but they are constructed from a special high carbon alloy steel. The steel tubing is specially manufactured for R&R to achieve uniform hardness of RC45-48 throughout the tine for excellent wear and toughness. These tines are much tougher and resist bending in extremely hard or rocky soils and you can expect 3-4 times longer life than from the Standard Hollow Tines.
R201581 Tine - Hollow Alloy 1/2 x 5/8MT x 4
R201583 Tine - Hollow Hd Alloy 1/2 x 4.5
R201582 Tine - Hollow Alloy 5/8 x 3/4MT x 4
R201584 Tine - Hollow Alloy Hd 5/8 x 4 1/2

Carbide-Tipped Alloy Hollow Tines
The R&R Carbide-Tipped Alloy Hollow Tine construction is the same special high carbon alloy steel tubing and hardened to RC45-48 as the alloy hollow tines, with the addition of a carbide tip for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines. You can expect these tines to last 6-8 times longer than the R&R Standard Hollow Tines. Carbide tipped tines are not recommended in rocky soil conditions, as carbide, which is extremely wear resistant, can break when encountering hard impacts in rocks.
R201340 Tine - Hollow Carbide Tip 1/2
R201339 Tine - Hollow Carbide Tip 5/8
R201508 Tine - H Carbide .270 x 4.75x.072
R201510 Tine - Hol CARBIDE.350 x 4.75x.072
R201512 Tine - Hollow CARBIDE.5 x 4.75x.072

Machined Alloy Side-Eject Tines
These alloy tines remove a soil core which quickly exits the side of the tine through a precision machined slot. This slot is designed to avoid "plugging" that can occur using hollow tubular tines (especially the smaller diameters) in heavy soil conditions. R&R manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar. These side eject tines are very popular for the multiple tine holders which fit all greens aerators.
R201634 Tine - Side Eject Alloy 1/2 x 1/2 M
R201635 Tine - Side Eject Alloy 5/8 x 1/2 M
R523864 Tine - Side Eject Alloy 1/4 x 1/2MT
R201519 Tine - Side Eject 1/4 x 1/2MT x 4.5
R201636 Tine - Side Eject Alloy 1/2 x 1/2 M
R201520 Tine - Side Eject 1/4 x 5/8MT
R201637 Tine - Side Eject Alloy 5/8 x 5/8 M
R201521 Tine - Side Eject 1/4 x 3/4MT x 4.5
R201523 Tine - Side Eject 3/8 x 3/4MT x 4.7
R201524 Tine - Side Eject 1/2 x 3/4MT x 4.7
R201525 Tine - Side Eject 5/8 x 3/4MT x 4.7

Hollow Alloy Side-Eject Tines
Manufactured from special high carbon alloy tubular steel with a precision machined slot in the side wall to allow for more efficient core removal in heavy soils. R&R’s unique method of machining maintains the maximum side wall height for strength to avoid bending. These tines are through hardened to RC45-48 to create a much tougher and more wear resistant tine.
R201595 Tine - Hol Se Al 1/2x 4.5x.072
R201596 Tine - Hol Se Al 5/8x 4.5x.072

Alloy Slicing Knife Tines
These tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our own facility to RC45-48 and carry the same lifetime guarantee of quality as all our other tines.
R201454 Knife - Slicing 4 1/2 w/5/8 Mt
R201455 Knife - Slicing 4 1/2 w/3/4 Mt

Carbide-Tipped Machined Alloy Side Eject Tines
These alloy tines remove a soil core which quickly exits the side of the tine through a precision machined slot. This slot is designed to avoid "plugging" that can occur using hollow tubular tines (especially the smaller diameters) in heavy soil conditions. R&R manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC45-48 in our own heat treating facility. A carbide tip is then added for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines.
R201675 Tine - Se Carbide .300x3.5 1/2 Mt
R201677 Tine - Se Carbide .400x3.5 1/2 Mt
R201679 Tine - Se Carbide .500x3.5 1/2 Mt
R201676 Tine - Se Carbide .300x4.5 1/2 Mt
R201678 Tine - Se Carbide .400x4.5 1/2 Mt
R201680 Tine - Se Carbide .500x4.5 1/2 Mt
R201685 Tine - Se Carbide .400x3.5 5/8 Mt
R201687 Tine - Se Carbide .500x3.5 5/8 Mt
R201686 Tine - Se Carbide .400x4.5 5/8 Mt
R201688 Tine - Se Carbide .500x4.5 5/8 Mt
R201695 Tine - Se Carbide .500x3.5 3/4 Mt
R201696 Tine - Se Carbide .500x4.5 3/4 Mt

Carbide-Tipped Hollow Alloy Side-Eject Tines
Manufactured from special high carbon alloy tubular steel with a precision machined slot in the side wall to allow for more efficient core removal in heavy soils. R&R’s unique method of machining maintains the maximum side wall height for strength to avoid bending. These tines are through hardened to RC45-48 to create a much tougher and more wear resistant tine. A carbide tip is then added for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines.
R201509 Tine - Se Carbide .270x 4.75x.072
R201511 Tine - Se Carbide .350x 4.75x.072
R201513 Tine - Se Carbide .5x 4.75x.072
COPYRIGHT © 2011~2024 POWERUP LAWNCARE PRODUCTS  -  SITEMAP