PLP Golf & Turf - R&R Products

Search Parts


R&R Part No.	OEM Part No.	Description
Alloy Solid Tines
R201422		Tine - Needle 5mm (.196) x 3.5 Tech Note: These tines aerate without the work of cleaning up the mess of cores and debris left behind with conventional core aerating. R&R Solid Tines are manufactured from a special high-carbon steel bar and heat treated to RC45-48 in our own heat treat facility. They are available in all standard sizes but are especially popular in the smaller diameters for aerating in the summer months to relieve the stress on greens by allowing water, air and nutrients to easily flow into the root zone. With the combination of small holes and no cores, play can be resumed immediately.
R201423		Tine - Needle 5mm (.196) x 4.75
R201334		Tine - Solid 1/4 x 1/2 Mt 2.5L
R523863		Tine - Solid 1/4 x 1/2 Mt
R201330		Tine - Solid 5/16 x 1/2 Mt
R201349		Tine - Solid 1/4
R201341		Tine - Solid 5/16
R201344		Tine - Solid 3/8
R201345		Tine - Solid 1/2
R201432		Tine - Solid 5/16 x 4.375 x 3/4 Mt.
R201433		Tine - Solid 3/8 x 4.375 x 3/4 Mt.
R201434		Tine - Solid 1/2 x 4.375 x 3/4 Mt.
R201346		Tine - Solid 5/8
Alloy Shatter Tines With their "+" shape, R&R shatter tines relieve compaction and allow water, air and nutrients to flow in the root zones and beyond with virtually no visible surface disturbance. Because of their unique shape the aerating area is maximized while allowing play to be resumed immediately. R&R Shatter Tines are manufactured from special high-carbon alloy investment castings and heat treated to RC45-48 in our own facility to insure you of optimum quality.
R201546		Tine - Shatter 3/8 x 1/2 Mt
R201555		Tine - Shatter 1/2 x 1/2 Mt
R201547		Tine - Shatter 3/8 x 5/8 Mt
R201560		Tine - Shatter 1/2 x 5/8 Mt
R201549		Tine - Shatter 3/8 x 3/4 Mt
R201570		Tine - Shatter 1/2 x 3/4 Mt
R201620		Tine - Shatter 5/8 x 3/4 Mt x 5.5
Standard Hollow Tines Designed to remove a soil core, R&R Standard Hollow Tines are constructed from case hardened tubular steel and are the most economical tines available. Case hardening hardens the inner and outer surfaces of the tine wall to over RC55 for added wear.
R201335		Tine - Hollow 1/4 x 5/8MT x 4-1/2L
R201336		Tine - Hollow 3/8 x 5/8MT x 4-1/2L
R201337		Tine - Hollow 1/2 x 5/8MT x 4-1/2L
R201338		Tine - Hollow 5/8 x 3/4MT x 4-1/2L
Alloy Hollow Tines Like Standard Hollow Tines, this line is also tubular and designed to remove a soil core, but they are constructed from a special high carbon alloy steel. The steel tubing is specially manufactured for R&R to achieve uniform hardness of RC45-48 throughout the tine for excellent wear and toughness. These tines are much tougher and resist bending in extremely hard or rocky soils and you can expect 3-4 times longer life than from the Standard Hollow Tines.
R201581		Tine - Hollow Alloy 1/2 x 5/8MT x 4
R201583		Tine - Hollow Hd Alloy 1/2 x 4.5
R201582		Tine - Hollow Alloy 5/8 x 3/4MT x 4
R201584		Tine - Hollow Alloy Hd 5/8 x 4 1/2
Carbide-Tipped Alloy Hollow Tines The R&R Carbide-Tipped Alloy Hollow Tine construction is the same special high carbon alloy steel tubing and hardened to RC45-48 as the alloy hollow tines, with the addition of a carbide tip for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines. You can expect these tines to last 6-8 times longer than the R&R Standard Hollow Tines. Carbide tipped tines are not recommended in rocky soil conditions, as carbide, which is extremely wear resistant, can break when encountering hard impacts in rocks.
R201340		Tine - Hollow Carbide Tip 1/2
R201339		Tine - Hollow Carbide Tip 5/8
R201508		Tine - H Carbide .270 x 4.75x.072
R201510		Tine - Hol CARBIDE.350 x 4.75x.072
R201512		Tine - Hollow CARBIDE.5 x 4.75x.072
Machined Alloy Side-Eject Tines These alloy tines remove a soil core which quickly exits the side of the tine through a precision machined slot. This slot is designed to avoid "plugging" that can occur using hollow tubular tines (especially the smaller diameters) in heavy soil conditions. R&R manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC45-48 in our own heat treating facility. These side eject tines are very popular for the multiple tine holders which fit all greens aerators.
R201634		Tine - Side Eject Alloy 1/2 x 1/2 M
R201635		Tine - Side Eject Alloy 5/8 x 1/2 M
R523864		Tine - Side Eject Alloy 1/4 x 1/2MT
R201519		Tine - Side Eject 1/4 x 1/2MT x 4.5
R201636		Tine - Side Eject Alloy 1/2 x 1/2 M
R201520		Tine - Side Eject 1/4 x 5/8MT
R201637		Tine - Side Eject Alloy 5/8 x 5/8 M
R201521		Tine - Side Eject 1/4 x 3/4MT x 4.5
R201523		Tine - Side Eject 3/8 x 3/4MT x 4.7
R201524		Tine - Side Eject 1/2 x 3/4MT x 4.7
R201525		Tine - Side Eject 5/8 x 3/4MT x 4.7
Hollow Alloy Side-Eject Tines Manufactured from special high carbon alloy tubular steel with a precision machined slot in the side wall to allow for more efficient core removal in heavy soils. R&R’s unique method of machining maintains the maximum side wall height for strength to avoid bending. These tines are through hardened to RC45-48 to create a much tougher and more wear resistant tine.
R201595		Tine - Hol Se Al 1/2x 4.5x.072
R201596		Tine - Hol Se Al 5/8x 4.5x.072
Alloy Slicing Knife Tines These tines allow water, air and nutrients to flow into the root zones and beyond with virtually no visible surface disturbance, allowing play to be resumed immediately. All of these tines are precision machined out of solid high-carbon alloy steel bar and heat treated in our own facility to RC45-48 and carry the same lifetime guarantee of quality as all our other tines.
R201454		Knife - Slicing 4 1/2 w/5/8 Mt
R201455		Knife - Slicing 4 1/2 w/3/4 Mt
Carbide-Tipped Machined Alloy Side Eject Tines These alloy tines remove a soil core which quickly exits the side of the tine through a precision machined slot. This slot is designed to avoid "plugging" that can occur using hollow tubular tines (especially the smaller diameters) in heavy soil conditions. R&R manufactures a wide selection of these side-eject tines machined from special high-carbon alloy steel solid bar and heat treated to RC45-48 in our own heat treating facility. A carbide tip is then added for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines.
R201675		Tine - Se Carbide .300x3.5 1/2 Mt
R201677		Tine - Se Carbide .400x3.5 1/2 Mt
R201679		Tine - Se Carbide .500x3.5 1/2 Mt
R201676		Tine - Se Carbide .300x4.5 1/2 Mt
R201678		Tine - Se Carbide .400x4.5 1/2 Mt
R201680		Tine - Se Carbide .500x4.5 1/2 Mt
R201685		Tine - Se Carbide .400x3.5 5/8 Mt
R201687		Tine - Se Carbide .500x3.5 5/8 Mt
R201686		Tine - Se Carbide .400x4.5 5/8 Mt
R201688		Tine - Se Carbide .500x4.5 5/8 Mt
R201695		Tine - Se Carbide .500x3.5 3/4 Mt
R201696		Tine - Se Carbide .500x4.5 3/4 Mt
Carbide-Tipped Hollow Alloy Side-Eject Tines Manufactured from special high carbon alloy tubular steel with a precision machined slot in the side wall to allow for more efficient core removal in heavy soils. R&R’s unique method of machining maintains the maximum side wall height for strength to avoid bending. These tines are through hardened to RC45-48 to create a much tougher and more wear resistant tine. A carbide tip is then added for even longer life. The advantage of using carbide tipped tines is the ability to maintain your maximum aerating depth consistently over the life of the tines.
R201509		Tine - Se Carbide .270x 4.75x.072
R201511		Tine - Se Carbide .350x 4.75x.072
R201513		Tine - Se Carbide .5x 4.75x.072